Victron 12V 500W Puresine Wave Pheonix Inverter
Developed for professional duty, the Pheonix 500W pure sine wave inverter has been designed without compromise in performance.
Light weight, high in quality of product & capable of supplying power, problem free.
Australian 240V plug
VE.Direct communication port
The VE.Direct port can be connected to:
• A computer (VE.Direct to USB interface cable needed)
• Apple and Android smartphones, tablets, MacBook’s and other devices (VE.Direct Bluetooth Smart dongle needed)
• Low battery voltage alarm trip and reset levels
• Low battery voltage cut-off and restart levels
• Dynamic cut-off: load dependent cut-off level
• Output voltage 210 – 245V
• Frequency 50 Hz or 60 Hz
• ECO mode on/off and ECO mode sense level Monitoring:
• In- and output voltage, % load and alarms
The full bridge plus toroidal transformer topology has proven its reliability over many years. The inverters are short circuit proof and protected against overheating, whether due to overload or high ambient temperature.
High start-up power
Needed to start loads such as power converters for LED lamps, halogen lamps or electric tools.
When in ECO mode, the inverter will switch to standby when the load decreases below a preset value (min load: 15W). Once in standby the inverter will switch on for a short period (adjustable, default: every 2,5 seconds). If the load exceeds a preset level, the inverter will remain on.
A remote on/off switch can be connected to a two pole connector, or between battery plus and the left hand contact of the two pole connector.
Victron 12V 500W Puresine Wave Pheonix Inverter Specifications
Continuous power at 25°C – 500VA
Continuous power at 25°C / 40°C – 400 / 350W
Peak power – 900W
Output AC voltage (adjustable) – 230VAC or 120VAC (+/-3%)
Output frequency (adjustable) – 50Hz or 60Hz (+/-0.1%)
Input voltage range (V) – 9.2 – 17
DC low shut down (adjustable) – 9.3V
DC low restart and alarm (adjustable) – 10.9V
Battery charged detected (adjustable) 14.0V
Maximum efficiency – 90%
Zero-load power – 6W
Default zero-load power in ECO mode – 1W
Operating temperature range – (-40°C to +65°C) with fan assisted cooling, operation degrades 1.25%/°C above 40°C
Humidity – max 95%
Material – Steel chassis and plastic cover
Colour – Blue RAL 5012
Battery connection – screw terminals
Maximum cable cross-section – 10mm2 / AWG8
Standard AC outlets – AS/NZS 3112
Weight – 3.9kg
Dimensions (mm) – 86 h x 172 w x 275 d
Remote on/off – YES
Automatic transfer switch – Filax
Victron 12V 500W Puresine Wave Pheonix Inverter Standards
Safety – EN-IEC 60335-1, EN/IEC 62109-1
EMC – EN 55104-1 / EN 55104-2 / IEC 61000-6-1 / IEC 61000-6-2 / IEC 61000-6-3
Automotive Directive – ECE R10-4