Victron BlueSmart IP22 Battery Charger 12V/30A w/ 3 outputs

$362.00 INC GST

Bluetooth Smart enabled
High efficiency
Adaptive 6-stage charge algorithm
Storage Mode
Also charges Li-ion (LiFePO₄) batteries
NIGHT and LOW setting
Protected against overheating
Eleven LEDs for status indication
SKU: BPC123044012 Category: Brand:


Victron BlueSmart IP22 Battery Charger 12V/30A w/ 3 outputs

Bluetooth Smart enabled
The Blue Smart IP22 Charger is the wireless solution to monitor voltage and current, to change settings and to update the
charger when new features become available.

High efficiency
With up to 94% efficiency, these chargers generate up to four times less heat when compared to the industry standard.
And once the battery is fully charged, power consumption reduces to 0,5 Watt, some five to ten times better than the
industry standard.

Adaptive 6-stage charge algorithm: test – bulk – absorption – recondition – float – storage
The Blue Smart Charger features a microprocessor controlled ‘adaptive’ battery management. The adaptive feature will
automatically optimize the charging process relative to the way the battery is being used.

Storage Mode: less maintenance and aging when the battery is not in use
The storage mode kicks in whenever the battery has not been subjected to discharge during 24 hours. In the storage
mode float voltage is reduced to 2,2V/cell (13,2V for a 12V battery) to minimize gassing and corrosion of the positive
plates. Once a week the voltage is raised back to the absorption level to ‘equalize’ the battery. This feature prevents
stratification of the electrolyte and sulfation, a major cause of early battery failure.

Also charges Li-ion (LiFePO₄) batteries
LiFePO₄ batteries are charged with a simple bulk – absorption – float algorithm.

NIGHT and LOW setting
When in NIGHT or LOW mode, the output current is reduced to max. 25% of the nominal output and the charger will be
totally noiseless. The NIGHT mode automatically ends after 8 hours. The LOW mode can be ended manually.

Protected against overheating
Output current will reduce as temperature increases up to 50°C, but the Blue Smart Charger will not fail.

Eleven LEDs for status indication
MODE button to set: NORMAL (14,4V) / HIGH (14,7V) / RECONDITION / LI-ION.”


Victron BlueSmart IP22 Battery Charger 12V/30A Specifications

Input voltage range – 180 – 265 VAC
Efficiency – 93%
Charge voltage ‘absorption’ – 14.2 to 14.6V
Charge voltage ‘float’ – 13.35 to 13.8V
Charge voltage ‘storage’ – 13.2 to 13.8V
Charge current – 30 amps
Charge algorithm – 6 stage adaptive
Low current mode – 15 amps
Can be used as power supply – Yes
Protection – Reverse polarity, Output short circuit, Over temperature
Operating temperature range – (- 30 to + 50C), fully rated up to +30C
Humidity – 95% max

Victron BlueSmart IP22 Battery Charger 12V/30A Enclosure

Material – Aluminium
Colour – Blue RAL 5012
Battery connection – Screw terminals 13 mm² / AWG6
230 V AC connection – 1.5m cable with AS/NZS 3112 plug
Protection category – IP22
Weight – 1.3 kg
Dimensions (h*w*d) – 235*108*65 mm

Victron BlueSmart IP22 Battery Charger 12V/30A Standards

Safety – EN 60335-1, EN 60335-2-29
Emission – EN 55014-1, EN 61000-6-3, EN 61000-3-2
Immunity – EN 55014-2,EN 61000-6-1, EN 61000-6-2, EN 61000-3-3
Automotive – E4-10R

View full range of Battery Chargers

View product datasheet

Additional information

Weight 1300 g
Dimensions 65 × 235 × 108 mm


There are no reviews yet.

Be the first to review “Victron BlueSmart IP22 Battery Charger 12V/30A w/ 3 outputs”