Victron Peak Power Pack 12.8V/40Ah/512Wh

$966.00 INC GST

The Peak Power Pack is a complete substitute for heavy lead acid batteries in applications where high currents occur for short time. Being primarily meant for caravan movers, it is equipped with a built in charger allowing charging from the car electrical system during the travel with the caravan. This way the pack will be fully charged upon arrival to the camping site. If necessary, the charging is possible using the supplied adapter via a grid outlet. Charging from a solar panel is also possible.

SKU: PPP012040000 Category: Brand:

Description

Victron Peak Power Pack 12.8V/40Ah/512Wh

Lightweight and easy to install
– Ideal for mobile applications.
Effective protection against improper use
– Ideal for solar power and other applications where excessive discharge might quickly cause damage to lead acid
batteries.

Output 1 “mover”: high capacity output for caravan manoeuvring systems and other applications that are
energy-intensive
– Ideal for caravan manoeuvring systems (caravan movers).
– The 8Ah version is meant for lighter caravans. 20Ah or more is recommended for caravans above 1000kg.
– Short-circuit proof.
– Protected against excessive battery discharge.

Output 2 “domestic”: for low DC loads (not available for the 8Ah model)
– Intended for lighting, audio and video, pumps, fridges.
– Short-circuit proof.
– Protected against excessive battery discharge.

Input 1 “car/solar”: charging while driving or charging with a solar panel.
– Equipped with voltage and current control for safe charging of the lithium-ion battery. In fact, any source of electric
power can be connected to this input (e.g. a dynamo or a battery charger), as long as 11V < Vin < 25V.
The current limitation is automatically set to a safe value.

Input 2 “adapter”: the adapter supplied can be connected to this input
– Battery charging current: 3A, and suitable for 110/230V power supply.
Rapid charging is possible via output 1 (high capacity output), only with 30Ah and 40Ah models
– A battery charger or transformer/charger can be connected to the high capacity output. The maximum charging
current is 15A and 20A respectively and the recommended charging current 14V (maximum 14.2V).

Storage mode
– Reduces power consumption to almost zero. Prevents damage by excessive discharge of the battery during storage.

Remote control with status indicator
– Push button (supplied) with a dual-colour LED status indicator:
o Short push of the button: high capacity output activated for 30 minutes (mover applications), LED red.
o Hold down for 2 seconds: high capacity output always activated, LED red, slow flashing.
o Hold down for 5 seconds: storage mode, LED blue, flashes 10 times.
o Battery is charged via input 1, LED blue, slow flashing.
o Battery fully charged, LED blue.
o Overload or overheating, LED red, flashes.

VE.Direct port: can be connected to a PC or smartphone
(‘VE.Direct to USB’ or ‘VE.Direct Bluetooth Smart dongle’ required)
– Operation:
o Output 1: on / 30-minute timer / off
o Output 2: on/off
o Input 1: on/off
– Scanning:
o Battery voltage
o Temperature and alarms

Victron Peak Power Pack 12.8V/40Ah/512Wh Specifications

Capacity – 40Ah
Stored Energy – 512Wh
Battery Type – Lithium Ion – LiFePO4
Nominal Voltage – 12.8V
Self-discharge when activated – < 13Ah/year
Self-discharge in storage mode – < 6.5Ah/year

Output 1

Output current – 150A
Max output current – 200A
Short circuit current – 300A
Safety features – Overload / short-circuiting / temperature / excessive discharge
Max charge current – 20A
Recommended charging voltage – 14V
Max charging voltage – 14.2V
Max cable diameter – 16 mm2

Output 2 (not available on 8Ah model)

Output current – 30A.
Max output current – 50A
Short circuit current – 80A
Safety features – Overload / short-circuiting / temperature / excessive discharge
Max charge current – 10A
Recommended charging voltage – 14V
Max charging voltage – 14.2V
Max cable diameter – 6 mm2

Input 1

Input voltage range – 11 V < Vin < 25 V
Current limit – 7A

Input 2

Output voltage – 15 V
Output current – 3 A
Input voltage – 110 / 230V
Input frequency – 50 / 60 Hz

General

Operation – Multifunctional push-button with dual-colour LED
VE.Direct Port – Communication with a smartphone (VE.Direct Bluetooth Smart-dongle required), Connection to a PC (VE.Direct to USB cable required)
Operating temperature – ( – 20 to + 40C)
Max humidity – 95%
Weight – 8.60 kg
Dimensions ( h * w * d ) – 212 * 190 * 172 mm

Victron Peak Power Pack 12.8V/40Ah/512Wh Standards

Safety – NEN-EN-IEC 60335-1, NEN-EN-IEC 60335-2-29, NEN-EN-IEC 62109-1
Emission / Immunity – NEN-EN 55014-1, NEN-EN 55014-2, NEN-IEC 61000-3-2, NEN-IEC 61000-3-3, NEN-EN 50498

View product datasheet

View full range of Batteries

Additional information

Weight 8600 g
Dimensions 172 × 190 × 212 mm

Reviews

There are no reviews yet.

Be the first to review “Victron Peak Power Pack 12.8V/40Ah/512Wh”