$335.00 INC GST

SKU: BAM030712000R Category: Brand:


Bluetooth inside
With Bluetooth built-in, the BMV Smart is ready for the Internet of Things (IoT) era. With Bluetooth being
implemented in most other Victron Energy products, wireless communication between products will simplify
system installation and enhance performance.

Download the Victron Bluetooth app
Use a smartphone or other Bluetooth enabled device to
– customize settings,
– monitor all important data on single screen,
– view historical data, and to
– update the software when new features become available.

Easy to install
All electrical connections are to the quick connect PCB on the current shunt. The shunt connects to the
monitor with a standard RJ12 telephone cable. Included: RJ 12 cable (10 m) and battery cable with fuse (2 m);
no other components needed. Also included are a separate front bezel for a square or round display appearance, a securing ring for rear
mounting and screws for front mounting.

Midpoint voltage monitoring
One bad cell or one bad battery can destroy a large, expensive battery bank. When batteries are connected in
series, a timely warning can be generated by measuring the midpoint voltage. Please see the BMV manual,
section 5.2, for more information. We recommend our Battery Balancer (BMS012201000) to maximize service life of series-connected lead-acid

Very low current draw from the battery
Current consumption: 0,7Ah per month (1mA) @12V and 0,6Ah per month (0,8mA) @ 24V
Especially Li-ion batteries have virtually no capacity left when discharged until low voltage shutdown.
After shutdown due to low cell voltage, the capacity reserve of a Li-ion battery is approximately 1Ah per
100Ah battery capacity. The battery will be damaged if the remaining capacity reserve is drawn from the
battery. A residual current of 10mA for example may damage a 200Ah battery if the system is left in
discharged state during more than 8 days

Bi-stable alarm relay
Prevents increased current draw in case of an alarm

Other features
– Battery voltage, current, power, ampere-hours consumed and state of charge
– Remaining time at the current rate of discharge
– Programmable visual and audible alarm
– Programmable relay, to turn off non critical loads or to run a generator when needed
– 500 Amp quick connect shunt and connection kit
– Shunt selection capability up to 10.000 Amps
– VE.Direct communication port
– Stores a wide range of historical events, which can be used to evaluate usage patterns and battery health
– Wide input voltage range: 9,5 ? 95V
– High current measurement resolution: 10 mA (0,01A)
– Additional input to measure voltage (of a second battery), temperature or midpoint voltage, and
corresponding alarm and relay settings.


Supply voltage range – 6.5 to 95 VDC
Current draw, back light off – < 1mA
Input voltage range, auxiliary battery – 6.5 to 95 VDC
Battery capacity – 20 – 9999 Ah
Operating temperature range – (- 40 to + 50C)
Measures voltage of second battery, temperature and midpoint – Yes
Temperature measurement range – ( – 20 to + 50C)
VE.Direct communication port – Yes
Bistable relay – 60V / 1A

Resolution & Accuracy

Current – +/-0.01A
Voltage – +/-0.01V
Amp hours – +/-0.1Ah
State of charge – +/-0.1%
Time left – +/-1 minute
Temperature – +/-1C
Accuracy of current measurement – +/-0.4%
Accuracy of voltage measurement – +/-0.3%

Installations & Dimensions

Installation – Flush mount
Front – 63 mm diameter
Front bezel – 69 x 69 mm
Body diameter – 52 mm
Body depth – 31 mm


Safety – EN 60335-1
Emission / Immunity – EN 55014-1 / EN 55014-2
Automotive – ECE R10-4 / EN 50498


Included Shunt – 500A/500mV
Included Cables – 10 m 6 core UTP with RJ12 connectors, and cable with fuse for + connection
Optional temperature sensor – ASS000100000