BATTERY MONITOR BMV-702 (BLACK)
VICTRON BMV-702 SHUNTED BATTERY MONITOR • CALCULATES AMPERE HOURS CONSUMED AND THE STATE OF CHARGE OF A BATTERY
Reference No. BAM010702200R
The BMV-702 is our newest high precision battery monitor. The essential function of a battery monitor is to calculate ampere hours consumed and the state of charge of a battery. Ampere hours consumed are calculated by integrating the current flowing in or out of the battery.
Battery ‘fuel gauge’, time-to-go indicator, and much more:
The remaining battery capacity depends on the ampere-hours consumed, discharge current, temperature and the age of the battery. Complex software algorithms are needed to take all these variables into account.
Next to the basic display options, such as voltage, current and ampere-hours consumed, the BMV-702 series also displays state of charge, time to go, and power consumption in Watts.
The BMV-702 features an additional input which can be programmed to measure the voltage (of a second battery), battery temperature or midpoint voltage (see below).
Use the Bluetooth Smart dongle to monitor your batteries on Apple or Android smartphones, tablets, macbooks and other devices.
Easy to install:
All electrical connections are to the quick connect PCB on the current shunt. The shunt connects to the monitor with a standard RJ12 telephone cable. Included: RJ 12 cable (10 m) and battery cable with fuse (2 m); no other components needed.
Also included are a separate front bezel for a square or round display appearance, a securing ring for the rear mounting and screws for the front mounting.
Easy to program (with your smartphone!):
A quick install menu and a detailed setup menu with scrolling texts assist the user when going through the various settings.
Alternatively, choose the fast and easy solution: download the smartphone app (Bluetooth Smart dongle needed)
Midpoint voltage monitoring (BMV-702 only):
This feature, which is often used in industry to monitor large and expensive battery banks, is now for the first time made available at a low cost, to monitor any battery bank.
A battery bank consists of a string of series connected cells. The midpoint voltage is the voltage halfway along the string. Ideally, the midpoint voltage would be exactly half of the total voltage. In practice, however, deviations will be seen, that depend on many factors such as a different state of charge for new batteries or cells, different temperatures, internal leakage currents, capacities and much more.
Large or increasing deviation of the midpoint voltage, points to improper battery care or a failed battery or cell. Corrective action following a midpoint voltage alarm can prevent severe damage to an expensive battery. Please consult the BMV manual for more information.
- Battery voltage, current, power, ampere-hours consumed and state of charge
- Remaining time at the current rate of discharge
- Programmable visual and audible alarm
- Programmable relay, to turn off non critical loads or to run a generator when needed
- 500 Amp quick connect shunt and connection kit
- Shunt selection capability up to 10.000 Amps
- VE.Direct communication port
- Stores a wide range of historical events, which can be used to evaluate usage patterns and battery health
- Wide input voltage range: 6,5 – 95V
- High current measurement resolution: 10 mA (0,01A)
- Low current consumption: 2,9Ah per month (4mA) @12V and 2,2Ah per month (3mA) @ 24V
BMV-702 additional features:
Additional input to measure voltage (of a second battery), temperature or midpoint voltage, and corresponding alarm and relay settings.
BMV-700HS: 60 to 385 VDC voltage range:
No additional parts needed. Note: suitable for systems with grounded minus only (battery monitor is not isolated from shunt).
Other battery monitoring options:
- VE.Net Battery Controller
- Lynx Shunt VE.Net
- Lynx Shunt VE.Can
More about midpoint voltage:
One bad cell or one bad battery can destroy a large, expensive battery bank. When batteries are connected in series, a timely warning can be generated by measuring the midpoint voltage. Please see the BMV manual, section 5.2, for more information.
Supply voltage range
6,5 - 95 VDC 6,5 - 95 VDC
60 – 385 VDC
Current draw, back light off
< 4mA < 4mA
Input voltage range, auxiliary battery
n. a. 6,5 - 95VDC
Battery capacity (Ah)
1 - 9999 Ah
Operating temperature range
-40 +50°C (-40 - 120°F)
Measures voltage of second battery, or
temperature, or midpoint
Temperature measurement range
VE.Direct communication port
60V / 1A normally open (function can be inverted)
RESOLUTION & ACCURACY (with a 500 A shunt)
± 0,1 Ah
State of charge (0 – 100%)
Time to go
± 1 min
Temperature (0 - 50°C or 30 - 120°F)
n. a. ± 1°C/°F
Accuracy of current measurement
Accuracy of voltage measurement
INSTALLATION & DIMENSIONS
69 x 69mm (2.7 x 2.7 inch)
52mm (2.0 inch)
31mm (1.2 inch)
Emission / Immunity
EN 55014-1 / EN 55014-2
ECE R10-4 / EN 50498
500A / 50mV
10 meter 6 core UTP with RJ12 connectors, and cable with fuse for ‘+’ connection