REDARC BCDC1225D BATTERY CHARGER
REDARC BCDC1225D DC-DC CHARGER 25AMP
Reference No. BCDC1225D
REDARC’s range of In-vehicle Dual Battery Chargers are designed, built and tested in Australia for our unique conditions to make sure they won’t let you down. With features like fully sealed construction and fan-free cooling - water, dust and vibration are no match for the In-vehicle Dual Battery Charger... you can be assured they can handle the roughest tracks in outback Australia and the deepest water crossings at Cape York.
REDARC’s knowledge of Australian conditions is engineered into every unit. All models operate up to a market-leading 80°C meaning they are going to work in even the most extreme heat of the Simpson Desert. A higher operating temperature and compact in size also allows for flexible installation options, from the engine bay to inside a van or camper trailer.
The REDARC In-vehicle Dual Battery Charger range features a wide 9-32 volt input range, allowing an auxiliary battery to be charged from either a 12 or 24 volt vehicle electrical system. All models incorporate dual battery isolation as well as protection against voltage spikes, overheating and reverse polarity connection, to ensure complete protection of all your batteries.
The next-generation 25, 40 and 50 amp models with fully integrated MPPT solar regulators are able to charge common lead acid auxiliary batteries as well as lithium iron phosphate batteries (LiFeP04). They charge from solar and DC inputs simultaneously, with built in ‘Green Power Priority’ they will select solar first, meaning less load on the alternator. They also suit standard and variable voltage/smart alternators.
With more and more electrical devices being used when travelling around Australia, along with more complex vehicle electrical systems, having the right battery charging solution has never been more important. The REDARC range of In-vehicle Dual Battery Chargers ensure optimum performance of electrical equipment such as fridges, lights, CPAP machines and even hydraulic pumps when they’re powered from a dual battery setup. By employing a unique, multi-stage charging algorithm, the In-vehicle Dual Battery Chargers have been designed to charge any commonly-used automotive auxiliary battery to 100% while you’re on the move and from solar (model dependent).
To see if your vehicle needs a DCDC charger: Click here
- Multi-stage charging saves you money
by maximising battery life
- Increase run time of loads like fridges and lights
- Allows for flexible installation in 12 or 24 volt vehicles
- Overcomes voltage drop caused by long cable runs
- Separate DC and solar charging inputs
- Maximises the performance and life of your auxiliary battery
- Simultaneous DC and solar charging with Green Power Priority
- Suits 12V/24V standard and variable voltage/smart alternators
- Suitable for AGM, GEL, standard lead acid, calcium and LiFePO4 batteries
Input voltage range:
|9 - 32V|
Solar voltage range:
|9 - 32V|
Solar switch on voltage (unregulated):
Maximum charging voltage:
|No load current:|
Recommended input fuse:
165 x 120 x 37mm
|-10°C to +80°C|