ELITE LIFEPO4 12V 100AH SMARTSHUNT BUNDLE

ELITE LIFEPO4 12V 100AH SMARTSHUNT BUNDLE

ENERDRIVE EPL-100-12V-ELITE 12V 100AH LITHIUM IRON PHOSPHATE (LIFEPO4) BATTERY • THE SMARTSHUNT IS AN ALL ONE BATTERY MONITOR WITHOUT THE DISPLAY • BUILT IN BLUETOOTH FOR EASE OF PROGRAMMING & MONITORING


Brand: Enerdrive

Reference No. K-100L-SMARTSHUNT

0

1,195.00Incl

1,086.36Excl
1195.0AUD
Add to Cart

eLITE BATTERY OUT OF STOCK UNTIL EARLY OCTOBER

**BUNDLE CONSISTS OF ENERDRIVE EPL-100-12V-ELITE 12V 100AH LITHIUM BATTERY & VICTRON SMARTSHUNT 500A**


Enerdrive eLITE lithium battery:


The new Enerdrive  12v 100Ah eLITE Lithium Battery has been designed as an “entry level” lithium battery for the customer who wants to get into the lithium market without having to spend big. This unit is a stripped back version of the ever popular 100Ah B-TEC Lithium battery but, without all the bells and whistles.

Wireless Battery Monitoring Technology, not in this little beauty. To save costs, we decided to remove the monitoring option from the eLITE. Does this reduce the quality of the battery?, certainly not. Its all about offering a high quality battery at an entry level price.


Battery management system:

The battery is also equipped with an internal Battery Management System that can monitor and optimise each Prismatic cell within the battery during normal operation. It will protect the battery pack from over charge, over discharge, over temperature & short circuit. The BMS helps to ensure safe and accurate operation of the battery.


Size & weight savings:
 

Lithium v AGM Capacities;


100Ah Lithium = 160Ah AGM

125Ah Lithium = 200Ah AGM

200Ah Lithium = 320Ah AGM

300Ah Lithium = 480Ah AGM

(Based on standard depth of discharge for both Lithium (80%) and AGM (50%).


The Enerdrive eLITE battery provides 60% more usable power than its equivalent lead acid cousin and being nearly 50% lighter and 30% smaller makes for a superior alternative. The Enerdrive eLITE battery is perfect for camper trailers, 4WD’s (AUX battery), caravans, small water craft, low power communication sites or any other application that requires the use of a single deep cycle battery that meets the amp hour capacity.

 

About Enerdrive: 


With over 7 years of researching, designing and testing lithium batteries and the associated charging systems, Enerdrive are at the forefront of lithium battery systems in Australia. Enerdrive are the only Australian company that can supply a fully integrated self-branded energy system to suit your setup. With over 3000 complete systems in operation Australia wide, Enerdrive is regarded as the leader in the field of lithium batteries and energy systems for Mobile, Marine and Remote applications.


Please Note: 
 
The eLITE battery is capable to be paralleled to a second eLITE battery of the same size. For maximum performance and lifespan of your eLITE battery, no more than 2 batteries should be connected together to increase your overall capacity. Overall loads when paralleled should not exceed the current limits of a single batteries BMS. The 100Ah battery is able to accept a maximum inverter capacity of 1000W only. Exceeding the maximum inverter capacity can damage the BMS Management within the battery. 

If you are requiring a battery system larger than eLITE, please look at the ePOWER B-TEC battery range or the Enerdrive Pro Series Power Pack Systems of which can offer multiple parallel and series connections with Active Cell Balancing Protection across the entire pack.
 

Victron SmartShunt:

 

The SmartShunt is an all in one battery monitor, only without a display. Your phone acts as the display. The SmartShunt connects via Bluetooth to the VictronConnect App on your phone (or tablet) and you can conveniently read out all monitored battery parameters, like state of charge, time to go, historical information and much more. Alternatively the SmartShunt can be connected and be read by a GX device. Connection to the SmartShunt is made via a VE.Direct cable.


The SmartShunt is a good alternative for a BMV battery monitor, especially for systems where battery monitoring is needed but less wiring and clutter is wanted. The SmartShunt is equipped with Bluetooth, a VE.Direct port and a connection that can be used for: monitoring a second battery, midpoint monitoring or a temperature sensor.


Differences compared to BMV712 Battery Monitor:

- No programmable visual and audible alarm.

- No programmable relay.


 
 



 
 


EPL-100-12V-ELITE-

Normal Specification

EPL-100-12V-ELITE

 

 

Nominal Voltage

12.8V

Nominal Capacity

100Ah

 

 

Cycle Life (DOD – 80% under controlled conditions)

≥ 2000 Cycles

Standard Charge Specification (Lithium profile charger required)

Battery Charge Temperature

̴ 45°C

Normal Charge Voltage CV/CC*

14.20 ̴ 14.60V

Standby (Float) Voltage

13.50 ̴ 13.60V

Maximum Charge Current

80A @ 25°C for 30mins

 

 

Recommended Charge Current for Maximum Life

≤33A

 

 

Standard Discharge Specification

Battery Discharge Temperature

-20 ̴ 60°C

Battery Output Voltage Range

11.00 ̴ 14.60V

Maximum Discharge Current

100A @ 25°C ± 5°C for 30mins

 

Pulse Discharge Current

450A for 1.0s

Discharge Cut-off Voltage

≤11.20V

Circuit Protection

The battery is supplied with a LiFePO4 Battery Management System BMS that can monitor and optimize each single prismatic cell during charge & discharge, to protect the battery pack from overcharge, over discharge & short circuit. Overall, the BMS helps to ensure safe and accurate operation of the battery.

Over-Charge Protection

Over-charge Protection Per Cell

3.90V ± 0.03V

Over-charge Release Per Cell

3.60V ± 0.05V

Over-charge Release Method

Discharge below release voltage

Over-Discharge Protection

Over-discharge Protection Per Cell

2.80V ± 0.05V

Over-discharge Release Per Cell

3.20V ± 0.05V

Over-discharge Release Method

Apply Charge/Voltage ≥12.8V

Over Current Protection

Discharge Over Current

110A for 30s – 450A for 1s

 

Protection Reset Time

5s Auto Release

Over Current Release Method

Disconnect Load

Over Temperature Protection

Battery Discharge Over Temperature

Protection to 65°C ± 5°C

Release at 50°C ± 5°C

Battery Charge Over Temperature

Protection to 55°C ± 5°C

Release at 45°C ± 5°C

Short Circuit Protection

Auto release after 5s

Mechanical Characteristics

Dimensions

Length 310mm

 

Width 170mm

 

Height 225mm

 

Weight

Approx 12Kg

 

 

Storage Information

Temperature & Humidity Range

≤ 30 days -20°C ̴ 35°C, 45 ̴ 75% RH

≥ 30 days -10°C ̴ 30°C, 45 ̴ 75% RH

Self-discharge Rate

≤ 3% Per Month


SmartShunt-

Specifications

SmartShunt 500A / 1000A / 2000A

Supply Voltage Range

6,5-70 VDC

Current Draw

<1mA

Input Voltage range, Auxiliary Battery

6,5 – 70 VDC

Battery Capacity (Ah)

1-9999 Ah

Operating Temperature Range

-40 +50°C (-40  - 120°F)

Measures voltage of second battery, or temperatures, or midpoint

Yes

Temperature Measurement range

-20 +50°C

VE.Direct communication port

Yes

Resolution & Accuracy

Current

±0,01A

Voltage

±0,01V

Amp hours

±0,1Ah

State of Charge (0-100%)

±0,1%

Time to go

±1 min

Temperature (0-50°C or 30 - 120°F)

±1°C/°F

Accuracy of current measurement

±0,4%

Accuracy of voltage measurement

±0,3%

Installation & Dimensions

Installation

Flush Mount

Front

63mm diameter

Front bezel

69 x 69mm (2.7 x 2.7 inch)

Body Diameter

52mm (2.0 inch)

Body Depth

31mm (1.2 inch)

Standards

Safety

EN 60335-1

Emission/Immunity

EN 55014-1/EN 55014-2

Automotive

ECR R10-4/EN 50498

Accessories

Shunt (Included)

500A/50mV

Cables (Included)

10 meter 6 core UTP with RJ12 connectors, and cable with fuse for ‘+’ connection

Temperature Sensor

Optional (ASS000100000)

Enerdrive EPL-100-12V-ELITE spec sheet-

(*No downloads available yet)

Victron SmartShunt 500A spec sheet-


Victron SmartShunt 500A drawing-