BTEC LIFEPO4 24V 100AH AC BUNDLE

EPL100BT 24V ENERDRIVE LITHIUM IRON PHOSPHATE (LIFEPO4) BATTERY • EP2430 240V EPOWER AC CHARGER • BUILT IN BLUETOOTH MONITORING


Brand: Enerdrive

Reference No. K10024VACBUNDLE

0

3,799.00 Incl

3,453.64 Excl
Add to Cart

**BUNDLE CONSISTS OF 100AH BTEC LITHIUM BATTERY & EP2430 240V 30A EPOWER AC CHARGER**


ePOWER B-TEC LiFeP04 24v 100Ah Lithium Battery


Available in 12v 100Ah, 125Ah, 200Ah capacities and 24v & 36v 100Ah, the ePOWER B-TEC lithium battery is designed and intended for use in deep cycle applications where a single battery is required that meets the amp hour capacity.


Smart Phone Monitoring System


The Enerdrive ePOWER B-TEC battery incorporates wireless Battery Monitoring Technology. By downloading the Android™ or Apple® app to your smartphone or tablet device, you can monitor the following information;


  • Battery Capacity

  • Battery Voltage

  • Battery Current (Amps)

  • Battery State of Charge (SOC)

  • Battery State of Health (SOH)

  • Battery Status

  • Individual Cell Voltage

  • Battery Temperature

  • Battery Cycles

  • Battery Alarms

  • Battery Event Information


Battery Management System


The battery is also equipped with an internal Battery Management System that can monitor and optimise each Prismatic cell within the battery during normal operation. It will protect the battery pack from over charge, over discharge, over temperature & short circuit. The BMS helps to ensure safe and accurate operation of the battery.


Size & Weight Savings


Lithium v AGM Capacities;

  • 100Ah Lithium = 160Ah AGM

  • 125Ah Lithium = 200Ah AGM

  • 200Ah Lithium = 320Ah AGM

(Based on standard depth of discharge for both Lithium (80%) and AGM (50%).


The ePOWER B-TEC battery provides 60% more usable power than its equivalent lead acid cousin and being nearly 50% lighter and 30% smaller makes for a superior alternative. The ePOWER B-TEC battery is perfect for camper trailers, 4WD’s (AUX battery), caravans, small water craft, low power communication sites or any other application that requires the use of a single deep cycle battery that meets the amp hour capacity. With over 5 years of researching, designing and testing lithium batteries and the associated charging systems, Enerdrive are at the forefront of lithium battery systems in Australia. Enerdrive are the only Australian company that can supply a fully integrated self-branded energy system to suit your setup. With over 1200 complete systems in operation Australia wide, Enerdrive is regarded as the leader in the field of lithium batteries and energy systems for Mobile, Marine and Remote applications.


EPI2430


Enerdrive’s ePOWER Industrial Battery Charger is built to withstand vibration and exposure to dust or moisture typically found when used in typical on-board or industrial applications. Charge Algorithm updates and downloadable charger data logs are easily accessible via the use of a USB memory stick. Extremely Durable. A fully sealed die cast aluminum enclosure protects the charger from fluids and other contaminants. The design of the charger enclosure mirrors the internal components, protecting against shock and vibration. (IP67 if using AC input seal). Programmable Charging. A USB host port allows for charger data logging downloads and charge algorithm uploads using a commonly available USB flash drive. This information can be used by OEMs to improve products, limit battery warranty claims and help technicians with troubleshooting issues. Battery Charging Flexibility. With over 25 algorithms to choose from that suit 90%+ of the batteries on the market today, the ePOWER Industrial charger also has the ability to create full custom algorithms to suit any type of lead acid or lithium battery. The charger is optimized to provide precise battery charging of different battery chemistries and battery manufacturers. These charge profiles allow charging to occur quickly and carefully, maximizing battery life and performance.

 Model

EPI-2430

EPI-3620

EPI-4815

DC Output

Nominal Voltage (V)

24V

36V

48V

Maximum Voltage (V)

38V

57V

76V

Maximum Current (A)

30A

20A

15A

Applicable to battery

AGM, Flooded, GEL (12 Cell, 40Ah Min)

Reverse Polarity

Electronic Protection Auto Reset

Short Circuit

Electronic Protection Auto Reset

AC Input

Voltage Range (V)

100-240V

Frequency (Hz)

50-60Hz

Maximum Current (A)

MAX Power 850W, 8.5A @100V – 4.25A @230V

Full Load AC Power Factor

>0.98

Other Specifications

Dimensions

20.7 x 18.0 x 16.0 cm

Weight

4.6kg

Operating Temperature

-30°C ~ +50°C

Storage Temperature

-40°C ~ +70°C

Normal Specification

EPL-100BT-24V

Nominal Voltage

25.6V

Nominal Capacity

100Ah

Cycle Life (DOD – 80% under controlled conditions)

≥ 2000 Cycles

Standard Charge Specification (Lithium profile charger required)

Battery Charge Temperature

0 ̴ 45°C

Normal Charge Voltage CV/CC*

28.80 ̴ 29.20V

Standby (Float) Voltage

27.00 ̴ 27.60V

Maximum Charge Current

50A @ 25°C for 30mins

Recommended Charge Current for Maximum Life

≤33A

Standard Discharge Specification

Battery Discharge Temperature

-20 ̴ 60°C

Battery Output Voltage Range

22.00 ̴ 29.20V

Maximum Discharge Current

100A @ 25°C ± 5°C for 30mins

Pulse Discharge Current

450A for 1.0s

Discharge Cut-off Voltage

≤22.40V

Circuit Protection

The battery is supplied with a LiFePO4 Battery Management System BMS that can monitor and optimize each single prismatic cell during charge & discharge, to protect the battery pack from overcharge, over discharge & short circuit. Overall, the BMS helps to ensure safe and accurate operation of the battery.

Over-Charge Protection

Over-charge Protection Per Cell

3.90V ± 0.03V

Over-charge Release Per Cell

3.60V ± 0.05V

Over-charge Release Method

Discharge below release voltage

Over-Discharge Protection

Over-discharge Protection Per Cell

2.80V ± 0.05V

Over-discharge Release Per Cell

3.20V ± 0.05V

Over-discharge Release Method

Apply Charge/Voltage ≥25.6V

Over Current Protection

Discharge Over Current

110A for 30s – 450A for 1s

Protection Reset Time

5s Auto Release

Over Current Release Method

Disconnect Load

Over Temperature Protection

Battery Discharge Over Temperature

Protection to 65°C ± 5°C

Release at 50°C ± 5°C

Battery Charge Over Temperature

Protection to 55°C ± 5°C

Release at 45°C ± 5°C

Short Circuit Protection

Auto release after 5s

Mechanical Characteristics

Dimensions

Length 485mm

Width 170mm

Height 245mm

Weight

Approx 25.0 Kg

Storage Information

Temperature & Humidity Range

≤ 30 days -20°C ̴ 35°C, 45 ̴ 75% RH

≥ 30 days -10°C ̴ 30°C, 45 ̴ 75% RH

Self-discharge Rate

≤ 3% Per Month

Manuals-