MAGNASINE COMBI 2700/12V KIT

MAGNASINE COMBI 2700/12V KIT

MAGNASINE 230V PURE SINE WAVE INVERTER / CHARGER • 12V 2700VA INVERTER 125A BATTERY CHARGER • KIT COMES WITH ME-RC50 REMOTE DISPLAY


Brand: Magnasine

Reference No. MEK-MS2712A2-KIT

0

4,299.00Incl

3,908.18Excl
4299.0AUD
Add to Cart

Magnasine:


Designed specifically for rugged recreational vehicle, marine or stand alone system use. The Magnasine by Enerdrive products are designed and produced in the USA utilising a tried and proven robust design platform, by a leading manufacturer of premium inverter/chargers for Mobile and Renewable Energy applications.

With more than 70 years of combined inverter manufacturing and design experience, which has resulted in the MagnaSine by Enerdrive range being one of the industry’s most reliable and advanced inverter/chargers.


Install the ME series in four easy steps:


Simply connect the inverter’s output to your distribution circuits or electrical panel, connect your shore power cable (AC) to the inverter’s easy-to-reach terminal block, connect the batteries, and switch on the power.


USA Made and Proven Design

  • Massive Inverter Surge Capacity

  • High Output Charging

  • Easy to Install

  • Low Frequency Transformer Inverter


ME-RC Remote Control


The ME-RC remote control allows you to monitor and customize the operating parameters to your MagnaSine inverter/charger. The ME-RC50 comes standard with a 50 foot, 4-conductor (twisted-pair) telephone cable and includes non-volatile memory (preserves adjustable settings, even if power to the remote or inverter is removed). The MagnaSine remote control has all of the programming and operation functions included in an easy-to-use package.


ME-RC displays:


  • Battery Voltage

  • Inverting

  • Battery Charging Status

  • Inverter Charger operating status and warnings

  • DC Load Amps, DC Amps Consumed and State of Charge (if ME-BMK is being used)

Using the ME-RC Remote Control, you can program:

  • Charging algorithm of the batteries

  • Battery Capacity

  • Battery Charge Efficiency Factor

  • Mains Current Limiter

  • Charging Rate

  • Mains AC Drop Out and Cut In

  • Power Save

  • Search Watts

  • Low Battery Cut Out

Model

MS2712E

MS4124E

MS4348E

Charger Specifications

Parallel Capable

(Parallel stackable up to 4 units)

No

Yes (RTR Remote required)

Yes (RTR Remote required)

Input battery voltage range

9 – 17 Vdc

18 – 34 Vdc

36 – 68 Vdc

Nominal AC output voltage

230 Vac ±5%

Output frequency and accuracy

50 Hz ± 0.4 Hz

Total Harmonic Distortion (THD)

< 5%

1 msec surge current (amps AC)

45

65

75

100 msec surge current (amps AC)

21

30

37

5 sec surge power (real watts)

4100

6300

7500

30 sec surge power (real watts)

3750

5300

7100

5 min surge power (real watts)

3600

4750

6600

30 min surge power (real watts)

3500

4600

5000

Continuous power output (@ 25°C)

2700 VA

4100 VA

4300 VA

Maximum continuous input current

360 ADC

273 ADC

143 ADC

Inverter efficiency (peak)

86%

90%

91%

Transfer time

~ 20 ms

Search mode (typical)

9 watts

9 watts

10 watts

No load (230 VAC output, typical)

34 watts

30 watts

28 watts

Waveform

Pure Sine Wave

Charger Specifications

Continuous output @ 25°C

125 ADC

105 ADC

55 ADC

Charger efficiency (peak)

83%

88%

91%

Power factor

> .95

> .95

> .95

Input current at rated output (AC amps)

8.5

14

16

Transfer relay capability

30 amps AC

Five stage charging capability

Bulk, Absorb, Float, Equalize (requires remote), and Battery SaverTM

Battery temperature compensation

Yes, 4.6 m (15) Battery Temp Sensor standard

Internal cooling

0 – 120 cfm variable speed drive using dual 92 mm brushless DC fans

Overcurrent protection

Yes, with two overlapping circuits

Over temperature protection

Yes on transformer, MOSFETS and battery

Conformal coating on PCBs for corrosion protection

Yes

Powder coated chassis & top for corrosion protection

Yes

Stainless steel fasteners for corrosion protection

Yes

Listings

C-Tick (Australian Standards)

Warranty

2 Years

Environmental Specifications

Operating temperature

-20°C – +60°C

Non-operating temperature

-40°C – +70°C

Operating humidity

0 – 95% RH non-condensing

Physical Specifications

Dimensions (H x W x L)

20.3 x 32.1 x 34.9 cm

Mounting

Shelf (top or bottom up) or wall

Weight

25.0 Kg

Shipping weight

28.2 Kg

Magnasine MEK-MS2712A2-KIT brochure-




Manual-