VE.NET TANK MONITOR (RESISTIVE)
THE VE.NET TANK SENSOR, WHEN USED WITH APPROPRIATE TANK SENDERS, CAN BE USED TO MONITOR THE AMOUNT OF LIQUID IN UP TO THREE TANKS.
Reference No. VRS000100010
The VE.Net Tank Sensor, when used with appropriate tank senders, can be used to monitor the amount of liquid in up to three tanks, such as a water or diesel tank.
VE.Net stands for Victron Energy Network. It allows all VE.Net compatible devices to communicate with each other. This means that the charger, for example, can get information from the battery monitor to optimize the charge current. It is possible to control and monitor all your VE.Net devices from a single VE.Net compatible control panel. This saves space and allows you to control all your devices from one place. A VE.Net consists of a VE.Net panel (VPN), and one or more other VE.Net devices, such as the VE.Net Tank Sensor or VE.Net Battery Controller.
To install your tank sensor you will need:
1.Standard supplied cable including inline fuse holder with a 1Amp slow blow fuse (voltage and current models only).
2.One Cat5 cable with two RJ45 connectors (to connect a VE.Net Panel or other VE.Net devices) available in 5, 10, 15, 20, 25 and 30 meters.
3.Wires for connecting the senders (refer to the sender manual for more information).
Supply voltage range
9 ... 70VDC Supply current (no senders connected): Standby Active
Operating temperature range
0 ... 50°C Sender input range:
· Voltage model
· Current model
4 … 20mA
· Resistance model
0 … 300Ω Potential free alarm contact:
75 x 110 x 23mm