EPRO UNIVERSAL REMOTE CONTROL
Brand: Enerdrive
Reference No. 5095500
The Universal Remote Control (URC) can be used to remotely readout all available parameters from your ePRO inverter, charger or inverter/charger. Depending on the connected device, it can show parameters like input current, input voltage, output voltage or output power. It is also possible to put the connected device in standby mode or to wake it up again.
Model | EPC 2000-12 | EPC 3000-12 | EPC 3500-24 |
Output power Pnom | 1800W | 2600W | 2800W |
P10minutes | 2100W | 3200W | 3800W |
Psurge | 4000W | 5000W | 6500W |
Output voltage / frequency | 230 Vac ± 2% / 50 Hz ± 0.05% | ||
Output waveform | 230 Vac ± 2% / 50 Hz ± 0.05% | ||
Input voltage (± 3% tolerance): Nominal | 12V | 12V | 24V |
Range | 10.5 (2) – 16 Vdc | 10.5 (2) – 16 Vdc | 21 (2) – 32 Vdc |
Maximum efficiency | 92% | 92% | 93% |
No load power consumption [ASB] | <20 W [3.5 W] | <20 W [3.5 W] | <20 W [4.0 W] |
Charger stage | |||
AC input voltage | 185 – 270 Vac / 45 – 65 Hz / PF > 0.95 | ||
Maximum continuous charging current | 80A | 120A | 70A |
Standard charge voltage (bulk / float @ 25°C) | 14.3V / 13.3V (programmable) | 14.3V / 13.3V (programmable) | 28.6V / 26.6V (programmable) |
Charge algorithm | IUoUoP, intelligent 4-stage, temperature compensated (programmable) | ||
AC Transfer Switch | |||
Maximum continuous current | 30 Ams | ||
Transfer time (typical) | 0 ms (inverter to mains) / <5 ms (mains to inverter) | ||
General | |||
ePROLink enabled | Yes | ||
Protections | high/low battery voltage, high temperature, overload, short circuit, high ripple voltage and low AC input voltage | ||
DC connections | M10 bolt terminals | ||
AC connections | Screw terminals | ||
Enclosure body size | 370 x 431 x 132mm | ||
Total weight | 18.5 Kg | ||
Protection class / operating temp. / storage temp. | IP21 / -20°C.. +50°C / -40°C.. +80°C (humidity max. 95% non-condensing) | ||
Standards | Complies with IEC 60335-2-29 including Australian deviations. | ||