VE.DIRECT TO VE.CAN INTERFACE
THE VE.DIRECT TO VE.CAN INTERFACE CABLE CAN BE USED TO MAKE BMV-700 INFORMATION AVAILABLE ON A VE.CAN NETWORK
Reference No. ASS030520410
Victron VE.DIRECT to VE.CAN:
The VE.Direct to VE.CAN interface cable can be used to make BMV-700 information available on a VE.Can network. Where it can be read by a Color Control GX for example.
•The interface cable does not work with other VE.Direct products, such as Solar Chargers, Inverters and also not with the BMV-712 Smart.
•When used in combination with a BMV-702 there is limited functionality with regards to the AUX function in the BMV: When used to measure starter battery voltage, that voltage will be transmitted to VE.Can. But when used to measure temperature and or mid-voltage, that data will not be transmitted on the VE.Can network.
BMV – NMEA 2000 Drop Cable
In conformance with NMEA 2000. Details are available from NMEA 2000 network suppliers.
Micro-C / M12 / DeviceNet male.
Canbus Supply Voltage Range
Canbus Current Draw – typical
15mA at 12VDC
NMEA2000 Load Equivalent Nr.
Operating temp. Range
-20 - +50°C
70 x 50 x 20mm