LITHIUM SUPERPACK 12.8V 100AH (HIGH CURRENT)
VICTRON SUPERPACK LITHIUM IRON PHOSPHATE (LIFEP04) BATTERY • BUILT IN BMS • HIGH CURRENT (100A CONTINUOUS)
Reference No. BAT512110710
Victron Lithium SuperPack:
Integrated BMS and safety switch:
The SuperPack batteries are extremely easy to install, not needing any additional components. The internal switch will disconnect the battery in case of over discharge, over charge or high temperature.
A lead-acid battery will fail prematurely due to sulfation:
•If it operates in deficit mode during long periods of time (i.e. if the battery is rarely, or never at all, fully charged).
•If it is left partially charged or worse, fully discharged.
A Lithium-Ion battery does not need to be fully charged. Service life even slightly improves in case of partial charge instead of a full charge. This is a major advantage of Li-ion compared to lead-acid.
In several applications (especially off-grid solar), energy efficiency can be of crucial importance. The round-trip energy efficiency (discharge from 100% to 0% and back to 100% charged) of the average lead-acid battery is 80%. The round-trip energy efficiency of a Li-ion battery is 92%. The charge process of lead-acid batteries becomes particularly inefficient when the 80% state of charge has been reached, resulting in efficiencies of 50% or even less in solar systems where several days of reserve energy are required (battery operating in 70% to 100% charged state). In contrast, a Li-ion battery will still achieve 90% efficiency even under shallow discharge conditions.
Can be connected in parallel:
The batteries can be connected in parallel. Series connection is not allowed. Use in upright position only.
*Images for display purposes
Nominal capacity @ 25°C
Nominal capacity @ 0°C
Nominal energy @ 25°C
Cycle life @ 80% DoD and 25°C
CHARGE and DISCHARGE
Max. cont. discharge current
Peak discharge current (10 sec)
End of discharge voltage
Charge voltage, absorption**
14,2V – 14,4V
Charge voltage, float
Max. cont. charge current
Discharge: -10°C to +50°C Charge: +5°C to +45°C
-40°C to +65°C
Max. storage time when fully charged
1 year≤25°C3 months ≤40°C
Power connection (threaded inserts)
Dimensions (LxWxH) mm
330 x 171 x 220
**The absorption period should preferably not exceed 4 hrs. A longer absorption period may slightly reduce service life.