BLUE SMART IP22 CHARGER 24/16 (1)

VICTRON 240V BLUETOOTH SMART CHARGER • 24V 16A 1 OUTPUT AU/NZ


Brand: Victron

Reference No. BPC241642012

0

327.00 Incl

297.27 Excl
Add to Cart

Victron blue smart charger:



The Blue Smart IP22 Charger is the new professional battery charger with built-in bluetooth. The Blue Smart IP22 Charger can be used on devices in your workshop and on motor vehicles, such as (classic) cars; motorbikes; boats and camper-vans.


The battery is charged, smartly... to perfect condition

The seven-step charging algorithm gets the best out of your battery. The charger gives the battery the power it needs, maintains its health, ensures better performance... and a longer life.


Recovery of deeply-discharged 'dead' batteries

Unlike other brands, the Blue Smart IP22 Charger will attempt to recharge a deeply-discharged battery by force-feeding it with a low current. Normal charging will then be resumed as soon as there is sufficient voltage across the battery terminals.


Check the status of your battery remotely

The Blue Smart IP22 is equipped with built-in Bluetooth, so the status of the charger and the battery can be checked on a smartphone, tablet or laptop. All settings of the charger can be configured with the VictronConnect app.


Bluetooth Smart

The Blue Smart IP22 Charger is the wireless solution to monitor voltage and current, to change settings and to update the charger when new features become available.


High efficiency

With up to 94% efficiency, these chargers generate up to four times less heat when compared to the industry standard.  And once the battery is fully charged, power consumption reduces to 0,5 Watt, some five to ten times better than the industry standard.


Adaptive 6-stage charge algorithm: test - bulk – absorption - recondition – float – storage

The Blue Smart Charger features a microprocessor controlled ‘adaptive’ battery management. The adaptive feature will

automatically optimize the charging process relative to the way the battery is being used.


Storage Mode: less maintenance and aging when the battery is not in use

The storage mode kicks in whenever the battery has not been subjected to discharge during 24 hours. In the storage

mode float voltage is reduced to 2,2V/cell (13,2V for a 12V battery) to minimize gassing and corrosion of the positive

plates. Once a week the voltage is raised back to the absorption level to ‘equalize’ the battery. This feature prevents

stratification of the electrolyte and sulfation, a major cause of early battery failure.


Also charges Li-ion (LiFePO₄) batteries

LiFePO₄ batteries are charged with a simple bulk – absorption – float algorithm.


NIGHT and LOW setting

When in NIGHT or LOW mode, the output current is reduced to max. 50% of the nominal output and the charger will be

totally noiseless. The NIGHT mode automatically ends after 8 hours. The LOW mode can be ended manually.


Protected against overheating

Output current will reduce as temperature increases up to 50°C, but the Blue Smart Charger will not fail.


Eleven LEDs for status indication

Charge algorithm: TEST / BULK / ABSORPTION / RECONDITION / FLOAT / STORAGE / READY. MODE button to set: NORMAL (14,4V) / HIGH (14,7V) / RECONDITION / LI-ION.

Blue Smart IP22 Charger

12V, 1output

15 / 20 /30A

12V, 3 outputs

15 / 20 / 30A

24V, 1 output

8 / 12 / 16A

24V, 3 outputs

16A

Input voltage range

180 – 265 VAC

180 – 265 VAC

Charge current, normal mode

15 / 20 / 30 A

8/12/16 A

Charge current, NIGHT or LOW

7,5 / 10 / 15 A

4 / 6 / 8 A

Efficiency

93%

94%

No load power consumption

0.5 W

0.5 W

Frequency

45 – 65 Hz

45 – 65 Hz

Number of outputs

1

3

1

3

Charge voltage 'absorption'

Normal: 14,4V High: 14,7V Li-ion: 14,2V

Normal: 28,8V High: 29,4V Li-ion: 28,4V

Charge voltage 'float'

Normal: 13,8V High: 13,8V Li-ion: 13,5V

Normal: 27,6V High: 27,6V Li-ion: 27,0V

Charge voltage 'storage'

Normal: 13,2V High: 13,2V Li-ion: 13,5V

Normal: 26,4V High: 26,4V Li-ion: 27,0V

Charge algorithm

6-stage adaptive

Can be used as power supply

Yes

Protection

Battery reversepolarity(fuse)Outputshortcircuit     Overtemperature

Operating temp. range

-20 to +50°C

Humidity (non-condensing)

Max 98%

ENCLOSURE

Material & Colour

Aluminium (blue RAL 5012)

Battery connection

Screw terminals 13 mm² / AWG6

230 V AC connection

Cable of 1,5 meter with CEE 7/7 plug, BS 1363 plug (UK) or AS/NZS 3112 plug (AU/NZ)

Protection category

IP22

Weight

1,3 kg

Dimensions       (h x w x d)

235 x 108 x 65 mm

STANDARDS

Safety

EN 60335-1, EN 60335-2-29

Emission

EN 55014-1, EN 61000-6-3, EN 61000-3-2

Immunity

EN 55014-2, EN 61000-6-1, EN 61000-6-2, EN 61000-3-3

Automotive

E4-10R

E4-10R

Datasheet-


Manual-