SKYLLA-TG 48/50 (1)

SKYLLA-TG 48/50 (1)

VICTRON SKYLLA BATTERY CHARGER • 48V 50A 1 OUTPUT 230V


Brand: Victron

Reference No. SDTG4800501

0

2,290.00Incl

2,081.82Excl
2290.0AUD
Add to Cart

Skylla-TG Charger


One full rated output and one 4 Amp output. Charge voltage can be precisely adjusted to suit any battery system. The input for the charger is 230V at 50/60HZ. Charge voltage can be measured directly on the battery terminals in order to compensate for voltage loss due to cable resistance. An external sensor allows measuring battery temperature and compensating charge voltage accordingly.


Perfect chargers for any type of battery


Charge voltage can be precisely adjusted to suit any sealed or unsealed battery system. In particular, sealed maintenance free batteries must be charged correctly in order to ensure a long service life. Overvoltage will result in excessive gassing and venting of a sealed battery. The battery will dry out and fail.


Suitable for AC and DC supply (AC-DC and DC-DC operation)


Except for the 3-phase input models, the chargers also accept a DC supply.


Controlled charging


Every TG Charger has a microprocessor, which accurately controls the charging in three steps. The charging process takes place in accordance with the IUoUo characteristic and charges more rapidly than other processes.


Use  of TG  Chargers as  a  power supply


As a result of the perfectly stabilized output voltage, a TG Charger can be used as a power supply if batteries or large buffer capacitors are not available.


Two outputs to charge 2 battery banks (24V models only)


The TG Chargers feature 2 isolated outputs. The second output, limited to approximately 4A and with a slightly lower output voltage, is intended to top up a starter battery.


To increase battery life: temperature compensation


Every Skylla TG Charger comes with a battery temperature sensor. When connected, charge voltage will automatically decrease with increasing battery temperature. This feature is especially recommended for sealed batteries which otherwise might be overcharged and dry out due to venting.


Battery voltage sense


In order to compensate for voltage loss due to cable resistance, TG Chargers are provided with a voltage sense facility so that the battery always receives the correct charge voltage.


Learn more about batteries and battery charging


To learn more about batteries and charging batteries, please refer to our book ‘Energy Unlimited’ (available free of charge from Victron Energy and downloadable from www.victronenergy.com).

 

Skylla

24/30TG

24/50TG

24/50TG

3phase

 

24/80 TG

 

24/100 TG

24/100 TG

3 phase

 

48/25 TG

 

48/50 TG

Input voltage (V AC)

230

3 x 400

230

230

3 x 400

230

230

Input voltage range (V AC)

185-264

320-450

185-264

185-264

320-450

185-264

185-264

Input voltage range (V DC)

180-400

n. a.

180-400

180-400

n. a.

180-400

180-400

Frequency (Hz)

45-65

Power factor

1

Charge voltage 'absorption' (V DC)

28,5

28,5

28,5

28,5

28,5

57

57

Charge voltage 'float' (V DC)

26,5

26,5

26,5

26,5

26,5

53

53

Charge current house batt. (A) (2)

30 / 50

50

80

100

100

25

50

Charge current starter batt. (A)

4

4

4

4

4

n. a.

n. a.

Charge characteristic

IUoUo (three step)

Battery capacity (Ah)

150-500

250-500

400-800

500-1000

500-1000

125-250

250-500

Temperature sensor

Can be used as power supply

Remote alarm

Potential free contacts 60V / 1A (1x NO and 1x NC)

Forced cooling

Protection (1)

a,b,c,d

Operating temp. range

-40 to +50°C (-40 - 122°F)

Humidity (non-condensing)

max 95%

ENCLOSURE

Material & Colour

aluminium (blue RAL 5012)

Battery-connection

M8 studs

230 V AC-connection

screw-clamp 2,5 mm² (AWG 6)

Protection category

IP 21

Weight kg (lbs)

5,5 (12.1)

13 (28)

10 (22)

10 (22)

23 (48)

5,5 (12.1)

10 (12.1)

Dimensions hxwxd in mm

365x250x147

365x250x257

365x250x257

365x250x257

515x260x265

365x250x147

365x250x257

(hxwxd in inches)

(14.4x9.9x5.8)

(14.4x9.9x10.1)

(14.4x9.9x10.1)

(14.4x9.9x10.1)

(20x10.2x10.4)

(14.4x9.9x5.8)

(14.4x9.9x10.1)

STANDARDS

Safety

EN 60335-1, EN 60335-2-29

Emission

EN 55014-1, EN 61000-3-2

Immunity

EN 55014-2, EN 61000-3-3

1)  Protection

a.Output short circuit

b.  Battery reverse polaritydetection

2)  Up to 40°C (100°F)ambient

 

c.Battery voltage toohigh

d.  Temperature toohigh

 

 

 

 

 

 

Spec Sheet-


Manual-


Dimensions-