SIMARINE QUAD SHUNT 4X 25A + 4
SHUNT TO SUIT SIMARINE PICO BATTERY MONITORS • TAKES UP TO 4X 25A CIRCUITS & 4X TANK INPUTS
Reference No. SI-SCQ25T
SCQ25T is an innovative combination of the SCQ25 shunt module PLUS the T107 Voltage and Resistance input Module with:
Four current inputs for monitoring individual consumer and generator continuous currents up to 25A (35A peak) per input
Can handle 12V or 24V systems, (same voltage used per device)
Innovative protected architecture allows wiring in either negative (low) or positive (high) side. (same system used per device)
Very convenient for monitoring smaller consumers like refrigerator or generators like solar, wind, hydro or shore power.
Current channels can be combined for higher amperage, meaning 2 x 25A channels can be used for measuring up to 50A.
Up to five modules can be connected simultaneously to monitor up to 20 current channels with PICO Battery Monitor.
Assignable NO or NC output relay.
Plus it is equipped with:
four resistance inputs for resistance-type tank level or temperature sensors and
three voltage inputs for voltage-type tanks sensors and battery voltages allows wide connection possibilities.
assignable relay output NO or NC.
It receives its power to operate via the twisted pair communication cable from the splitter power block.
It is a versatile module for monitoring:
Tanks of all descriptions
Inclinometer inputs (x and Y need an input each)
AC current sense
Irradiation sensor for solar performance
-20 to +70°C
Power Consumption at 12V
Current Measuring Channels
Current Measuring Range
0,01 – 50A
Peak Current (<1 min)
Peak Current (<5 sec)
Voltage Drop at 25 A
Maximal Voltage on Connections
0 ohm – 65 kohm
Number of Connections
Total number of 7 voltage and resistance inputs + 4 x 25A current inputs
Tank level sensors
7 (both Voltage and Resistance). If resistance used for temperature then only 3 Tank Sensors
4 (resistance only)