Features:
• 40A DC-DC Charging & Monitoring Unit
• 12V 200Ah B-TEC Lithium Battery
• 220W Ultra Slim Portable Solarcase
Components:
Featuring the Enerdrive Explorer Power System, Enerdrive 200Ah B-TEC Lithium Battery and Alvolta 220W Ultra Portable Solarcase, this kit is an impressive off-grid portable power solution. Designed by industry-leading manufacturers and cultivated by our team of experts, this portable off-grid power kit offers a complete solution for any camper, caravan or 4WD application.
Enerdrive’s Explorer Power System is the foundation for this kit, offering an all-encompassing power solution. Designed to effortlessly fit into your setup, the Explorer features a sleek design with access to all the important components in the front-facing panel, allowing you more space within your setup.
This power system seamlessly pairs with Enerdrive’s 200Ah B-TEC Lithium Battery. Designed for use in deep cycle applications, this battery is perfect for camper trailers, 4WDs (AUX battery) and caravans. Additionally, the 200Ah B-TEC Lithium Battery offers built-in Bluetooth capability and features an Internal Battery Management System (BMS) for easy monitoring.
The kit is rounded out with the 220W Portable Solarcase from Alvolta. Featuring top-tier monocrystalline solar cells in a lightweight, compact and sleek frame, this ultra high-powered solarcase is a must-have for off-grid power. Additionally, the solarcase and included cabling accessories each come in a protective carry case, making it easy, safe and convenient to travel with.
Our off-grid portable power kit offers you a complete power station, allowing you to confidently travel off-grid for longer.
Applications
Product Specifications
Explorer 3 (Left) | |
DC Battery Charger | 12V 40A+ DC2DC Battery Charger (Vehicle/Solar) |
Solar Charge Input | Included |
Lithium Battery Ready | Included |
Battery Monitor | Simarine SCQ50 Battery Monitor |
Pre-Wired Circuit Breakers for Main Power Equipment | Included |
Pre-Wired 35mm² Main Battery Cable with Main DC Fuse | Included |
Pre-Wired Fridge 50A Anderson Plug Connection | Included |
Switches | 4 x Contura Water Resistant Rocker Switches (Customisable) |
USB Output Sockets | Twin USB-A 2.4A Hi Amp Sockets |
Cigarette Socket Output | 1 |
Battery Reset Button | Included |
Ignition Input for Smart Alternator Equipped Vehicles | Included. Requires Connection |
Individual Load/Charge Module for Simarine | Included |
Water/Fuel Tank Monitoring for Simarine | 2x Resistance Inputs Included |
Water/Fuel Tank Module for Simarine | 4x Resistance Inputs, 3x Voltage (Optional) |
Dimensions | 455L x 155W x 330H mm |
Weight | 7.0kg |
Orientation | Left |
Warranty | 5-Years |
12V 200Ah B-TEC Lithium | |
Nominal Voltage | 12.8V |
Nominal Capacity | 200Ah |
Cycle Life (DOD – 80% under controlled conditions) | ≥ 2000 Cycles |
Battery Charge Temperature | 0 ̴ 45°C |
Normal Charge Voltage CV/CC* | 14.20 ̴ 14.60V |
Standby (Float) Voltage | 13.50 ̴ 13.80V |
Maximum Charge Current | 150A @ 25°C for 30mins |
Recommended Charge Current for Maximum Life, Charge in the lower amperage range | 40~100A |
Battery Discharge Temperature | -20 ̴ 60°C |
Battery Output Voltage Range | 11.00 ̴ 14.60V |
Maximum Discharge/Pulse Current | 200A @ 25˚C ±5˚C for 30 mins |
Pulse Discharge Current | 450A for 1.0s |
Discharge Cut-off Voltage | ≤11.20V |
Circuit Protection | The battery is supplied with a LiFePO4 Battery Management System BMS that can monitor and optimize each single prismatic cell during charge & discharge, to protect the battery pack from overcharge, over discharge & short circuit. Overall, the BMS helps to ensure safe and accurate operation of the battery. |
Over-charge Protection Per Cell | 3.90V ± 0.03V |
Over-charge Release Per Cell | 3.60V ± 0.05V |
Over-charge Release Method | Discharge below release voltage |
Over-discharge Protection Per Cell | 2.80V ± 0.05V |
Over-discharge Release Per Cell | 3.20V ± 0.05V |
Over-discharge Release Method | Apply Charge/Voltage ≥12.8V |
Battery Manual Reset Button | Yes |
Discharge Over Current | 220A for 30s – 450A for 1s |
Protection Reset Time | Approx. 10s Auto Release |
Over Current Release Method | Disconnect Load |
Battery Discharge Over Temperature | Protection to 65°C ± 5°C Release at 50°C ± 5°C |
Battery Charge Over Temperature | Protection to 55°C ± 5°C Release at 45°C ± 5°C |
Short Circuit Protection | Auto release after 5s |
Length | 505mm |
Width | 172.5mm |
Height | 265mm |
Weight | Approx. 25.0 Kg |
Case Construction | Hi Impact ABS Plastic |
Temperature & Humidity Range | ≤ 30 days -20°C ̴ 60°C, 5 ̴ 75% RH ≥ 90 days -10°C ̴ 45°C, 5 ̴ 75% RH |
Self-discharge Rate | ≤ 3% Per Month |
220W Solarcase | |
Electrical Data | |
Maximum Power | 220W |
Optimum Operating Voltage | 20.9V |
Optimum Operating Current | 10.53A |
Open Circuit Voltage | 24.5V |
Short Circuit Current | 11.05A |
Module Efficiency | 22.8% |
Maximum System Voltage | 200V DC |
Power Tolerance | ±3% |
Thermal Data | |
Operating Temperature Range | -20°C to +70°C |
Temperature Coefficient (Pmax) | -0.38%/°C |
Temperature Coefficient (Voc) | -0.36%/°C |
Temperature Coefficient (Isc) | -0.05%/°C |
Mechanical Data | |
Solar Cells | Monocrystalline 166mm Cells |
No. of Cells | 72 (3 x 12 x 2) |
Dimensions | 1095 x 1072 x 25mm |
Weight | 6.33kg |
Frame | Anodized Aluminium |
Junction Box | IP68 Rated |
Connectors | MC4 Style |
Output Cables | 4mm², 900mm |