ENERDRIVE BOARD 40A AC 40A DCDC INC SIMARINE

ENERDRIVE BOARD 40A AC 40A DCDC INC SIMARINE

THIS SYSTEM IS DESIGNED FOR THE END USER REQUIRING A MEDIUM LEVEL OF POWER REQUIREMENTS ALONG WITH AC & DC CHARGING ABILITY • INCLUDES EN31240 AC CHARGER • EN3DC40+ DC-DC CHARGER • SIMARINE BATTERY MONITORING • 5 YEAR WARRANTY


Brand: Enerdrive

Reference No. eSYS-D

0

2,929.00Incl

2,662.73Excl
2929.0AUD
Add to Cart

Enerdrive DIY boards:


Introducing Enerdrives DIY Installation Kits for 4WD Canopies, Caravans, Camper Trailers, Commercial Work Vehicles and more.

Enerdrive have created many different layouts and dimensional sizes to fit nearly every possible application. Designed for the DIY handyman with basic electrical knowledge through to the professional looking to save installation time. From small kits with AC & DC charging and battery monitoring up to kits with 2000w inverters and individual charge/load monitoring.

These kits are all pre-wired by Enerdrive where possible to keep the kits simple to install. All boards have a full wiring diagram showing each circuit and where to connect your loads, battery and inverter cabling. All items are mounted on a 12mm Black plastic (water & rot resistant) board for simple mounting into the application.

Enerdrive also have you covered from a service and support angle with the DIY Installation kits. Designed, constructed and pre-wired by Enerdrive, we know exactly the layout and wiring of your kit so any fault finding or support can be given quickly and concisely. Suits all lead acid battery types and lithium batteries.

*Please note, Enerdrive boards are made to order and can take 2-4 weeks lead time to build upon ordering.

K-AGM-Board-D board includes:


- Enerdrive ePOWER 12V 40A DC to DC battery charger   (EN3DC40+)

- Enerdrive ePOWER 12V 40A AC battery charger (EN31240)

- Enerdrive ePOWER 12/24V 40A low battery cutout IP66 (EN-LBC1224-40)

- Simarine LCD WIFI monitoring screen (PICO)

- Simarine SC301 300A main battery shunt

- Simarine individual load/charge module (SCQ25T)

- 3 Stud main negative busbar

- Main system circuit breaker 120A

- Inverter circuit breaker 200A

- Solar input positive circuit breaker 40A

- ePOWER DC2DC 60A output fuse connection

- ePOWER AC charger 50A output fuse connection

- 24hr critical load 4 circuit "wedge" fuse block

- Main 12 circuit "wedge" fuse block with negative bus and cover

- Battery restart switch (lithium batteries)

- 12mm black plastic mounting board. Water & rot resistant


Enerdrive DIY boards overview:

 Items Included                                      K-AGM-Board-C          K-AGM-Board-D           K-AGM-Board-E            K-AGM-Board-F          K-AGM-Board-G          K-DIY-Board-01        
 ePOWER AC 40Amp 230v Charger******
 ePOWER DC2DC 40+ Charger  (Vehicle/Solar) ** *  * *
 ePRO Plus 500A Battery Monitor with  Remote Display 
* *  *
 Simarine Pico LCD WIFI Monitoring Screen * ** 
 Simarine SC301 300A Main Battery Shunt * ** 
 Simarine SCQ25T Individual Load/Charge Module * ** 
 3 Stud Main Negative Bus Bar******
 40A Low Battery Cutout******
 Main System Circuit Breaker 120A******
 Inverter Circuit Breaker 200A*** ***
 Solar Input Positive Circuit Breaker 40A **** 
 ePOWER DC2DC 60A Output Fuse Connection******
 ePOWER AC Charger 50A Output Fuse  Connection******
 1 x 30A Load Output Fuse Connections     *
 2 x 30A Load Output Fuse Connections   ** 
 50A Load Output Fuse Connection*     
 24hr Critical Load 4 Circuit "Wedge" Fuse Block * ** 
 24hr Critical Load 8 Circuit "Wedge" Fuse Block  *   
 Main 6 Circuit "Wedge" Fuse Block with  Negative Bus and Cover     *
 Main 12 Circuit "Wedge" Fuse Block with  Negative Bus and Cover **   
 ePOWER 2000W AC Transfer Inverter with RCD & AC Transfer Switch*  *  
 Battery Restart Switch (Lithium Batteries)***** 
 12mm Black Plastic Mounting Board. Water &  Rot Resistance******
 175A Anderson Plug (Inverter)     *
 50A Anderson Plug (Solar Input)     *
 50A Anderson Plug (Vehicle Input)     *
 Dimensions (L x W x D)1185 x 380 x 130 mm600 x 490 x 100 mm600 x 490 x 100 mm1185 x 380 x 130 mm790 x 380 x 100 mm580 x 580 x 100 mm
 Weight      
 (*) Indicates Standard Fitment      


 
 

EN3DC40+

Model

EN3DC40+

Ouput Rating

Output Voltage

12V Nominal (8.0V min)

Output Current (Maximum)

40A – 50A

Output power

775W

Charger DC Output (CH1):

Selectable Battery Type

Gel, AGM, Flooded, Lithium, Program

Charger Voltage Range

13.8V – 15.5V

Float Voltage Range

13.0V – 13.8V

Charger Current (User Selectable)

5/10/15/20/25/30/35/40/45/50A (default 40A)

Equalize Voltage (flooded Battery)

15.5V

Equalize Charging Current

10% of Bulk Current Setting

Charging Control

2 stage / 3 stage selectable (Default 3 stage)

DC Output Bank

Single

Current draw from CH1 when in use

= < 50mA

Battery Temperature Setting

Low/ Normal/ High (Battery Temperature Sensor Standard)

Efficiency

95%

Input Rating (CH2 – MPPT Solar)

Input Voltage

14.5 – 45VOC

Maximum Input

≤23 input, 500W (600W allowable) ≥37.5-45V input, 750W (800W allowable)

Input Rating (CH3 – Start/Alternator)

Input Voltage

10.5 – 16VDC / 21 – 32DC

Dimensions

Height x Width x Depth

242mm x 172mm x 74mm

Unit Weight

1.85 Kg

Shipping Weight

2.17 Kg


EN31240-

Model

EN31220

EN31240

EN31260

EN32430

CHARGER OUTPUT

Output Current (Maximum)

20A

40A

60A

30A

OUTPUT VOLTAGE RANGE

Charge

14.2 – 15.5 V

28.4 – 31.0V

Float

13.4 – 13.8 V

26.8 – 27.6V

– Equalize

16.0 V

32.0V

Charging Control

Four stages (Bulk/Absorption/Float/Maintenance)

Two stages (Bulk/Absorption)

Constant Power Supply (Program setting)

Priority Battery Bank Charging

DC Output Bank

Three (1 fully independent, 2 common with diode isolation)

Selectable Battery Type

Gel, AGM, Flooded, Lithium, Program

Standby Current

< 2 mA

CHARGER INPUT

AC Input Voltage (Nominal)

90 to 265 VAC

AC Input Operating Range

207-265 Vac (2.0 A Max)90-125 Vac (3.8 A Max)

207-265 Vac (3.8 A Max)90 – 125 Vac (7.7 A Max)

207-265 Vac (5.9 A Max)90-125 Vac (11.3 A Max)

207-265 Vac (5.9 A Max)90-125 Vac (11.3 A Max)

AC Input Frequency Range

47 – 63 Hz

Power Consumption

350W (Full Load)

700W (Full Load)

1050W (Full Load)

1050W (Full Load)

Power Factor Correction

Yes

Charger Efficiency

> 82%

PROTECTION AND FEATURES

Reverse Polarity

Yes, (with user replaceable fuse/s)

Over Charge

Yes, unit shutdown

Over Temperature

Yes, unit de-rated and shutdown

Output Short Circuit

Yes, (with user replaceable fuse/s)

Cooling

Forced air ventilation (thermo controlled fan)

Temperature Setting

Hot, Normal, Cold (no sensor connected)

Battery Temp Sensor Port

RJ12 (standard battery temp. sensor supplied)

DISPLAY

LCD Display (with back light)

Charging status, Battery Voltage, Output Current & Fault Codes.

AC INPUT AND DC OUTPUT CONNECTION

AC Input Connection

IEC with Supplied 1.2M Power Lead

DC Output Connection

Heavy Duty Terminal (3 banks) – Pan Heads 6mm Thread

DC Output Ground

Single Heavy Duty Common Ground Stud

ENVIRONMENTAL AND OPERATING TEMPERATURE

Storage Range

-40° to 70° C

Operating Range

-20° to 60° C

Humidity

5-95%, relative humidity non-condensing

Ingress Protection

IP32 (Basic drip proof in vertical orientation)

Base Unit Weight and Dimensions

Weight: (kg)

2.4

2.6

4.0

4.0

Dimension: (mm) L x W x H

295 x 206 x 86

295 x 206 x 86

356 x 206 x 99

356 x 206 x 99

Optional Accessories

Remote Digital Display / Enerdrive Part Number EN3REM

Regulatory Compliance

Complies with AS/NZS 60335.2.29 Including Australian deviations.


EN-LBC1224-40-

EN-LBC1224-40

Auto Voltage Detect

12 / 24V

Max Load (shut down current)

40 – 45A

Peak current

120A

Weight

185g

Dimension LxWxH

82mm x 65mm x 41mm


Simarine Pico-

Operating

Voltage Range

6 – 35 V

Temperature Range

-10 – +70 °C (+10 – +160 °F)

Power Consumption at 12V

Operating, Wi-Fi on, 100% illumination

90 mA

Operating, Wi-Fi on, 70% illumination

35 mA

Operating, Wi-Fi on, 0% illumination

18 mA

Power off, logger still active

5 mA

Resolution

Current

± 0.01 A

Voltage

± 0.01 V

Amp hours

± 0.1 Ah

State of charge (0 - 100%)

± 0.1 %

Temperature

± 0.1 °C/°F

Barometer

Operating range

950 – 1080 hPa

WiFi

Radio frequency bands

2.4 GHz

Dimensions (without connector)

Standalone

98 x 84 x 10 mm

3.85 x 3.30 x 0.39 in

Panel

108.5 x 94 x 10 mm

4.27 x 3.70 x 0.39 in

Connectivity

Up to

Batteries

6

Shunts

24

Temperature sensors

10

Tank level sensors

14

Inclinometer sensors

2

Smart phone application

1

Logger capacity

up to 3 months


Simarine SCQ25T-

Specifications

Operating

Voltage Range

6-35 V

Temperature Range

-20 to +70°C

Power Consumption at 12V

Operating

3,5 mA

Current Measuring Channels

4

Current Measuring Range

Per Channel

0,01 – 50A

Accuracy

±0,6%

Resolution

0,01A

Sampling Rate

100ms

Maximal Current

Continuous

25A

Peak Current (<1 min)

35A

Peak Current (<5 sec)

50A

Voltage Drop at 25 A

35 mV

Maximal Voltage on Connections

35 V

Voltage Inputs

Range

0-35 V

Resolution

1 mV

Accuracy

±0,2%

Sampling Rate

100ms

Resistance inputs

Range

0 ohm – 65 kohm

Accuracy

±3,0%

Number of Connections

Total number of 7 voltage and resistance inputs + 4 x 25A current inputs

Tank level sensors

7 (both Voltage and Resistance). If resistance used for temperature then only 3 Tank Sensors

Temperature sensors

4 (resistance only)

Enerdrive K-AGM-BOARD-D wiring diagram-


Enerdrive EN3DC40+ spec sheet- 


Enerdrive EN3DC40+ manual-


Enerdrive warranty guide-


Enerdrive EN31240 spec sheet-


Enerdrive EN31240 manual-


Enerdrive EN31240 installation-


Enerdrive EN-LBC1224-40 spec sheet-


Enerdrive EN-LBC1224-40 manual-


Simarine PICO manual-

Simarine SI-SCQ25T manual-


Simarine SI-SCQ25T system overview-


Simarine SI-SCQ25T wiring diagram-


Enerdrive warranty guide-