PHOENIX INVERTER SMART 12/1600

PHOENIX INVERTER SMART 12/1600

VICTRON 230V PURE SINEWAVE INVERTER 12V 1600VA • BLUETOOTH BUILT IN; FULLY CONFIGURABLE WITH A TABLET OR SMART PHONE


Brand: Victron

Reference No. PIN122160000

0

1,079.40Incl

981.27Excl
Add to Cart

Phoenix inverter smart 1600VA - 3000VA:


The Phoenix Inverter Smart is an efficient and reliable inverter. Built on our proven and field tested Phoenix inverter platform, it now comes with a new slimmer design and full metal casing. Models are available in 1600VA, 2000VA and 3000VA for 12, 24 or 48V systems.

It’s powerful enough to supply most common plug in appliances in your car, boat, caravan or home. A toroidal transformer provides a high peak power surge capacity, stable voltage, frequency and high quality sine-wave.  

Installation is simpler than ever before with terminals now more accessible for the installer, enabling a more professional finish. 

Bluetooth is built-in, and makes setting up your high power inverter easier than ever before.

Configure alarms, alarm relay, voltage cut-off, output voltage, frequency, eco-mode and more, all from within VictronConnect.
 

Features:

Bluetooth built-in: fully configurable with a tablet or smartphone-

- Low battery voltage alarm

- Low battery voltage cut-off and restart levels

- Dynamic cut-off: load dependent cut-off level

- Output voltage: 210 - 245V

- Frequency: 50 Hz or 60 Hz

- ECO mode on/off and ECO mode sense level

- Alarm relay


Monitoring- In and output voltage, load and alarms


VE.Direct communication port- The VE.Direct port can be connected to a computer (VE.Direct to USB interface cable needed) to configure and monitor the same parameters.


Proven reliability- The full bridge plus toroidal transformer topology has proven its reliability over many years. The inverters are short circuit proof and protected against overheating, whether due to overload or high ambient temperature.


High start-up power- Needed to start loads such as power converters for LED lamps, halogen lamps or electric tools.


ECO mode- When in ECO mode, the inverter will switch to standby when the load decreases below a preset value. Once in standby the inverter will switch on for a short period every 2,5 seconds (adjustable). If the load exceeds the preset level, the inverter will remain on.


Remote on/off- A remote on/off switch or relay contact can be connected to a two pole connector. Alternatively, the H terminal (left) of the two pole connector can be switched to battery plus, or the L terminal (right) of the two pole connector can be switched to battery minus (or the chassis of a vehicle, for example).


LED diagnosis- Please see manual for a description.


To transfer the load to another AC source: the automatic transfer switch-For our low power inverters we recommend our Filax Automatic Transfer Switch. The Filax features a very short switchover time (less than 20 milliseconds) so that computers and other electronic equipment will continue to operate without disruption. Alternatively use a MultiPlus with built-in transfer switch.

 

Phoenix Inverter Smart

12/1600

Parallel and 3-phase operation

No

INVERTER

Input voltage range

9.3 – 17V

Output

Output voltage: 230VAC ±2% 50 Hz or 60Hz ± 0,1%

Cont. output power at 25ºC

1600VA

Cont. output power at 25ºC

1300W

Cont. output power at 40ºC

1200W

Cont. output power at 65ºC

800W

Peak power

3000VA

Max. Efficiency 12V

92%

Zero load power 12V

8W

Zero load power in ECO mode

0.6W

GENERAL

Programmable relay

Yes

Stop & start power ECO-mode

adjustable

Protection

a - g

Bluetooth wireless communication

For remote monitoring and system integration

VE.Direct communication port

For remote monitoring and system integration

Remote on-off

Yes

Common Characteristics

Operating temperature range: -40 to +65ºC (fan assisted cooling) Humidity (non-condensing): max 95%

ENCLOSURE

Common Characteristics

Material & Colour: stainless steel (blue RAL 5012; and black RAL 9017) Protection category: IP 21

Battery-connection

M8 bolts

230 V AC-connection

Screw terminals

Weight

12kg

Dimensions (H x W x D)

485x219x125mm

STANDARDS

Safety

EN 60335-1

Emission Immunity

EN 55014-1 / EN 55014-2/ IEC 61000-6-1 / IEC 61000-6-2 / IEC 61000-6-3

Automotive Directive

ECE R10-5

 

Spec Sheet-

 

Manual-


Dimensions-