MultiPlus-II 24/3000/70-32 GX
VICTRON 230V MULTIPLUS II PURE SINE WAVE INVERTER / CHARGER • 24V 3000VA INVERTER 70A BATTERY CHARGER WITH 32A AUTOMATIC TRANSFER SWITCH
Reference No. PMP242306000
Victron Multiplus-II GX:
An Inverter/Charger with device networking built-in, the MultiPlus-II GX communicates with a solar charger, batteries, and other devices to control a grid-connected, off-grid, or remote power installation. Capable of parallel operation for increased power output, or battery charge-rates, the MultiPlus-II GX can also be configured for three-phase supply. A host of advanced features - such as uninterrupted power supply, setting load limits, and supplementing limited grid-power availability with battery power - can all be controlled straight from your phone or smart device. Remote monitoring is also possible.
A MultiPlus-II with LCD and GX functionality- The MultiPlus-II GX integrates a MultiPlus-II inverter/charger and a GX device with a 2 x 16 character display.
Display and Wi-Fi- The display reads battery, inverter and solar charge controller parameters. The same parameters can be accessed with a smartphone or other Wi-Fi enabled device.
The integrated GX device includes:
A VE.Can interface. This can be used to connect to Victron VE.Can devices (eg VE.Can MPPTs), or the port can be reconfigured via the Remote Console for use with a compatible CAN-bus Li-ion Battery.
A USB port.
A Ethernet port.
A VE.Direct port.
Applications- The MultiPlus-II GX is intended for applications where additional interfacing with other products and/or remote monitoring is required, such as on-grid or off-grid energy storage systems and certain mobile applications.
Parallel and three phase operation- Only one GX unit is needed in case of Parallel and three phase operation.
*Images for display purposes only
PowerControl & PowerAssist
Maximum AC input current
Input voltage range
19 – 33V
Output voltage: 230 VAC ± 2%
Frequency: 50 Hz ± 0,1% (1)
Cont. output power at 25°C (3)
3000VA / 2400W
Cont. output power at 40°C / 65°C
2200W / 1700W
Maximum apparent feed-in power
Zero load power
Zero load power in AES mode
Zero load power in Search mode
Input voltage range: 187-265 VAC
Input frequency: 45 – 65 Hz
Charge voltage 'absorption'
Charge voltage 'float'
Maximum battery charge current (4)
Battery temperature sensor
Programmable relay (5)
a - g
VE.Bus communication port
For parallel and three phase operation, remote monitoring and system integration
General purpose com. port
VE.Can, USB, Ethernet, VE.Direct, Wi-Fi
Operating temp. range
-40 to +65°C (fan assisted cooling)
Material & Colour
Steel, blue RAL 5012
230 V AC-connection
Screw terminals 13 mm2 (6 AWG)
506 x 275 x 147 mm
Safety EN-IEC 60335-1, EN-IEC60335-2-29
EN-IEC 62109-1, EN-IEC 62109-2
Emission / Immunity Anti-islanding
EN 55014-1, EN 55014-2
EN-IEC 61000-3-2, EN-IEC 61000-3-3
IEC 61000-6-1, IEC 61000-6-2, IEC 61000-6-3
1) Can be adjusted to 60Hz
2) Protection key:
a) output short circuit
c) battery voltage too high
d) battery voltage too low
e) temperature too high
f)230 VAC on inverter output
g) input voltage ripple too high
3) Non-linear load, crest factor3:1
4) At 25°Cambient
5) Programmable relay which can be set for general alarm, DC under voltage or genset start/stop function.
AC rating: 230V / 4A, DC rating: 4A up to 35VDC and 1A up to 60VDC