SKYLLA-TG 24/100 (1+1)
VICTRON SKYLLA BATTERY CHARGER • 24V 100A 1+1 OUTPUT 230V
Reference No. SDTG2401001
One full rated output and one 4 Amp output. Charge voltage can be precisely adjusted to suit any battery system. The input for the charger is 230V at 50/60HZ. Charge voltage can be measured directly on the battery terminals in order to compensate for voltage loss due to cable resistance. An external sensor allows measuring battery temperature and compensating charge voltage accordingly.
Perfect chargers for any type of battery
Charge voltage can be precisely adjusted to suit any sealed or unsealed battery system. In particular, sealed maintenance free batteries must be charged correctly in order to ensure a long service life. Overvoltage will result in excessive gassing and venting of a sealed battery. The battery will dry out and fail.
Suitable for AC and DC supply (AC-DC and DC-DC operation)
Except for the 3-phase input models, the chargers also accept a DC supply.
Every TG Charger has a microprocessor, which accurately controls the charging in three steps. The charging process takes place in accordance with the IUoUo characteristic and charges more rapidly than other processes.
Use of TG Chargers as a power supply
As a result of the perfectly stabilized output voltage, a TG Charger can be used as a power supply if batteries or large buffer capacitors are not available.
Two outputs to charge 2 battery banks (24V models only)
The TG Chargers feature 2 isolated outputs. The second output, limited to approximately 4A and with a slightly lower output voltage, is intended to top up a starter battery.
To increase battery life: temperature compensation
Every Skylla TG Charger comes with a battery temperature sensor. When connected, charge voltage will automatically decrease with increasing battery temperature. This feature is especially recommended for sealed batteries which otherwise might be overcharged and dry out due to venting.
Battery voltage sense
In order to compensate for voltage loss due to cable resistance, TG Chargers are provided with a voltage sense facility so that the battery always receives the correct charge voltage.
Learn more about batteries and battery charging
To learn more about batteries and charging batteries, please refer to our book ‘Energy Unlimited’ (available free of charge from Victron Energy and downloadable from www.victronenergy.com).
*Image is for display purposes only & shows the SKYLLA-TG 24/50(1+1) 230V
Input voltage (V AC)
3 x 400
3 x 400
Input voltage range (V AC)
Input voltage range (V DC)
Charge voltage 'absorption' (V DC)
Charge voltage 'float' (V DC)
Charge current house batt. (A) (2)
30 / 50
Charge current starter batt. (A)
IUoUo (three step)
Battery capacity (Ah)
Can be used as power supply
Potential free contacts 60V / 1A (1x NO and 1x NC)
Operating temp. range
-40 to +50°C (-40 - 122°F)
Material & Colour
aluminium (blue RAL 5012)
230 V AC-connection
screw-clamp 2,5 mm² (AWG 6)
Weight kg (lbs)
Dimensions hxwxd in mm
(hxwxd in inches)
EN 60335-1, EN 60335-2-29
EN 55014-1, EN 61000-3-2
EN 55014-2, EN 61000-3-3
a.Output short circuit
b. Battery reverse polaritydetection
2) Up to 40°C (100°F)ambient
c.Battery voltage toohigh
d. Temperature toohigh